EcoFlow 160W Solar Panel – Lightweight and Efficient Portable Energy Solution

EcoFlow 160W solar panel is a lightweight, foldable and bifacial solar panel designed to charge portable power stations during camping trips, travel, caravan holidays, stays at a cabin or other off-grid activities. Next-generation N-type TOPCon solar cells, up to 25% conversion efficiency and an ability to capture light through the rear surface help generate as much solar energy as possible, even when installation space is limited.

Panel weighs approximately 3.8 kg and folds into a compact size for transportation. An integrated XT60 cable, adjustable support stand and solar angle guide make it quick to set up without requiring a separate stand or complicated installation. IP68 protection helps protect panel against dust and water, making it suitable for changing outdoor conditions.

160 W Rated Power and Bifacial Design

EcoFlow 160W solar panel provides a rated output of 160 W ±5 W under standard STC test conditions. Unlike a conventional monofacial panel, its bifacial construction can capture sunlight through its rear surface. Rear side uses ambient light and light reflected from ground to increase total energy generation under suitable conditions.

Under BNPI test conditions, EcoFlow 160W solar panel can achieve an output of up to 177 W ±5 W. Actual output depends on sunlight intensity, panel orientation, weather, temperature, shading and reflectivity of the surface beneath it. Rear-side performance is improved when panel is placed above a light-coloured or reflective surface, such as pale stone, sand or snow. Additional output from its bifacial design may be lower over dark or light-absorbing surfaces.

High-Efficiency TOPCon Technology

Panel uses N-type monocrystalline TOPCon solar cells with an energy conversion efficiency of at least 25%. High efficiency means a larger proportion of available sunlight can be converted into usable electrical energy. This allows panel to deliver 160 W of rated power while remaining relatively compact and easy to transport.

Efficient energy generation is particularly important when only a limited number of sunny hours are available for charging. EcoFlow 160W solar panel is suitable for charging portable power stations during daytime and can help extend device operating times while camping, working outdoors or experiencing a prolonged power outage.

Actual charging speed also depends on connected power station’s battery capacity, current charge level and maximum solar input. If solar input cannot accept all power generated by panel, charging speed will be limited by power station’s input capacity.

Lightweight and Foldable Construction

EcoFlow 160W solar panel weighs 3.8 kg ±0.3 kg, making it convenient to carry in a car, camper van or caravan. Compared with larger rigid solar panels, it requires less space during transportation and storage and can be deployed quickly whenever needed.

When unfolded, panel measures 1677 × 598 × 26 mm, including handle. Folded dimensions are 609 × 598 × 26 mm, allowing it to fit inside a car boot, camper storage compartment or cupboard at home. Integrated carrying handle makes moving panel between locations easier.

Foldable construction is intended for temporary and mobile use. Panel is not recommended for long-term hanging installation. A purpose-built rigid solar panel and suitable mounting hardware should be used for permanent wall, balcony or roof installations.

Adjustable Support Stand and Solar Angle Guide

Integrated support stand can be adjusted between 30° and 60°. This makes it possible to adapt panel position according to sun height, season and location. Wide adjustment range is also useful at northern latitudes, where sun may remain lower in the sky.

EcoFlow 160W solar panel features an integrated solar angle guide, which helps position panel at a suitable angle in relation to sunlight. Energy generation is most efficient when sunlight reaches panel surface as close to perpendicular as possible. As sun moves across sky, checking and adjusting panel position during the day can noticeably increase total energy collected.

For best results, panel should be positioned in an open area where trees, buildings, vehicles or other objects do not cast shadows across its surface. Even partial shading can significantly reduce total solar output.

Integrated XT60 Cable for Quick Connection

EcoFlow 160W solar panel features an integrated XT60 cable with an XT60I-F connector, making connection to a portable power station quick and convenient. Since cable is built into panel, it does not need to be carried separately or disconnected after every use.

Panel is primarily intended for charging EcoFlow portable power stations. It can also be used with other devices featuring a compatible XT60 solar input, provided that their permitted input voltage, current and power correspond to panel specifications. Technical requirements of connected device should always be checked before use.

Open-circuit voltage is 21.4 V, while operating voltage at maximum power is 18.8 V. Short-circuit current is 9.2 A under STC conditions, with an operating current of 8.7 A at maximum power. Under BNPI test conditions, bifacial panel can reach a short-circuit current of 10.2 A and an operating current of 9.6 A. These values are important when connecting panel to a third-party power station or separate solar charge controller.

IP68 Protection for Outdoor Use

EcoFlow 160W solar panel has an IP68 rating for dust and water resistance. This allows it to be used at a beach, campsite, near a boat or in other environments where it may encounter dust, moisture and water splashes.

IP68 protection does not mean that connectors or connected power station can be submerged in water or carelessly left in heavy rain. Cable and connectors should always be clean and dry before connection. To maintain reliable performance, panel surface should be cleaned with a soft cloth after use. Sharp objects, excessive bending and abrasive cleaning products should be avoided.

Suitable for Travel, Camping and Backup Power

EcoFlow 160W solar panel is a practical solution for anyone who needs a mobile source of renewable energy. During camping or outdoor trips, it can charge a portable power station, which can then supply energy to phones, laptops, lights, cameras, drone batteries and other devices. In a camper van or caravan, panel helps reduce dependence on mains electricity and fuel-powered generators.

At a cabin or temporary worksite, panel can be used as part of a small independent energy system. During an emergency or power outage, it can recharge a portable power station in sunny conditions and help keep essential communication and lighting equipment operational. Actual daily energy production depends on weather and season, so connected battery capacity and device energy consumption should also be considered when planning a system.

Why Choose EcoFlow 160W Solar Panel?

EcoFlow 160W solar panel combines high efficiency, bifacial energy generation and an easily transportable construction. Its 160 W rated power is suitable for charging a wide range of portable power stations, while rear surface can help increase output to as much as 177 W under favourable conditions. Approximate weight of 3.8 kg, foldable design and integrated carrying handle make it a convenient choice for users who do not want to transport a heavy or bulky solar panel.

N-type TOPCon technology provides at least 25% conversion efficiency, while a 30–60° adjustable stand and solar angle guide help position panel correctly. Integrated XT60 cable speeds up setup, and IP68 protection together with a five-year manufacturer’s warranty supports long-term use in different outdoor environments. EcoFlow 160W solar panel is a versatile energy solution for camping, travel, cabins, outdoor work and expanding a backup power system.

Nimivõimsus	STC 160W (±5W) / BNPI 177W (±5W)
Tõhusus	≥25%
Mõõdud	Lahtivoldituna: 1677 mm * 598 mm * 26 mm (käepidemega) Kokkupanduna: 609 mm * 598 mm * 26 mm (käepidemega)
Lühisvool	STC 9.2A BNPI 10.2A(Imp STC 8.7A BNPI 9.6A)
Elemendi tüüp	N-tüüpi TOPCon monokristalliline räni
Kaal	3.8kg±0.3kg
Pistiku tüüp	XT60I-F
Avatud vooluringi pinge	21.4V（Vmp18.8V）
Vee- ja tolmukindlus	IP68