DJI Lito 1 Flight Battery – 2590 mAh battery for up to 36 minutes of flight

DJI Lito 1 Flight Battery is an original battery designed for DJI Lito 1, providing up to 36 minutes of flight time under the manufacturer’s test conditions. This 2590 mAh lithium-ion battery is suitable as a replacement for an existing battery or as a spare to continue flying after a battery change.

An additional battery is practical for travel, capturing landscapes and longer shooting days. Having several charged batteries available lets you plan consecutive flights and reduces the need to wait for charging on location.

Up to 36 minutes of flight time

DJI Lito 1 Flight Battery provides up to 36 minutes of flight time on a single charge, giving you time to find a suitable shooting angle, refine your composition and try different camera movements. Actual flight time depends on the environment, usage and drone firmware version.

The manufacturer measured maximum flight time in a controlled wind tunnel under conditions equivalent to windless flight at sea level. The drone flew forward at a constant speed of 21.6 km/h, with Obstacle Avoidance Action set to Brake and the camera set to 1080p/24 fps, without active video recording. The test continued until battery depletion triggered a forced landing.

The 36-minute figure should therefore be treated as a maximum test result. During normal flights, you also need to allow sufficient battery power for the return flight and landing.

2590 mAh lithium-ion battery

DJI Lito 1 Intelligent Flight Battery uses Li-ion battery technology and has a capacity of 2590 mAh. Its model number is BWXGN1-2590-7.32, helping you identify the correct replacement battery.

DJI Lito 1 Flight Battery is designed specifically for DJI Lito 1. Choosing an original battery ensures you are using a power source specified by the manufacturer for this drone model.

Charging with DJI Lito 1 Charging Hub

The battery is compatible with the separately sold DJI Lito 1 Charging Hub, which holds up to three flight batteries. When used with DJI 65W Portable Charger, the hub can fully charge three standard DJI Lito 1 Intelligent Flight Batteries in approximately 87 minutes.

Parallel charging requires batteries of the same model and a USB PD charger with an output of at least 45 W. The hub first charges the batteries with lower charge levels sequentially until their charge levels are close to that of the most charged battery. All three batteries then continue charging simultaneously.

The charging hub also supports transferring the remaining energy from multiple batteries to the one with the highest charge level. This helps make better use of the energy left in your batteries after flying.

Charging temperature and flight planning

DJI Lito 1 Flight Battery has a specified charging temperature range of +5 to +40 °C. After flying in cold conditions or when the battery has warmed up during use, allow it to reach a suitable temperature before charging.

Before a longer shooting day, charge the batteries you will need and plan your flights around the locations and shots you want to capture. A spare battery lets you start your next flight after landing and changing the battery, without waiting for a depleted battery to recharge.

Compatibility and package contents

DJI Lito 1 Flight Battery is compatible with DJI Lito 1 and can be used with DJI Lito 1 Charging Hub.

The package includes one DJI Lito 1 Intelligent Flight Battery. The drone, charging hub and power adapter are not included.