FIXED Mini Charger 100W – Compact Three-Port GaN Fast Charger
FIXED Mini Charger 100W is a compact wall charger combining up to 100 W of output power, two USB-C ports and one USB-A port. Support for Power Delivery 3.2, PPS and AVS enables charging of compatible laptops, smartphones, tablets and other USB-powered devices.
Charging several devices with one charger helps reduce the need for separate adapters. This is practical both at a desk, where a laptop and phone need power simultaneously, and in a travel bag, where accessory size and quantity affect packing convenience.
Up to 100 W of Power via USB-C
The charger’s USB-C1 port delivers up to 100 W when used on its own, achieving this at 20 V and 5 A. A second USB-C port supports up to 20 W, while USB-A provides up to 18 W of output power.
Use USB-C1 for devices with higher power requirements, such as a compatible laptop. A phone or smaller accessory can be connected to another suitable port. This arrangement helps match charging capacity to each connected device’s needs.
With Power Delivery, charger and device negotiate a suitable charging mode. A 100 W rating therefore does not mean every device will draw 100 W: actual power depends on supported charging profiles, cable specifications and charging conditions. To use full output power, a USB-C cable rated for at least 100 W and 5 A is required.
Power Distribution When Charging Multiple Devices
When both USB-C ports are used simultaneously, power is distributed at up to 70 W + 20 W. When using USB-C1 and USB-A together, available output is up to 70 W + 18 W, respectively.
USB-C2 and USB-A share up to 15 W when used together. With all three ports connected, USB-C1 provides up to 70 W, while the other two ports share up to 15 W. Total output when charging three devices simultaneously is therefore up to 85 W.
In practice, this allows you to reserve the higher-power port for a laptop and use the remaining connections for a phone and headphones, for example. If a laptop requires the maximum 100 W output, it should be charged through USB-C1 with no other ports in use.
Power Delivery 3.2, PPS and AVS
Alongside Power Delivery 3.2, FIXED Mini Charger 100W supports PPS and AVS charging with adjustable voltage. PPS output reaches up to 55 W, while AVS provides up to 60 W.
Fast charging requires compatibility throughout the connection. A USB-C connector alone does not determine charging speed: the device must support the relevant protocol, and the cable must be rated to carry the required current. This allows one charger to serve different devices whose power requirements and charging capabilities may vary considerably.
GaN Technology and Compact Dimensions
Gallium nitride, or GaN, technology enables chargers with high power density. Compared with conventional silicon-based solutions, GaN components allow faster switching and lower power losses, supporting a more compact design.
FIXED Mini Charger 100W measures 36 × 79 × 36 mm and weighs 109 g. Its small housing fits easily into a laptop bag’s accessory pocket, making it convenient to carry between home and work.
Protection Features and Mains Compatibility
Built-in protection guards against overheating, overvoltage and short circuits. Designed for European sockets, this model accepts an input voltage of 200–240 V at 50/60 Hz. Its housing incorporates GRS-certified recycled materials.
Before travelling, check your destination’s mains voltage and socket type. A plug adapter alone does not convert voltage, so local mains power must meet the charger’s input requirements. For everyday use, suitable cables and appropriate port selection help create a convenient charging setup for multiple devices.
Explore our full range of chargers and cables here.
