DJI FPV Landing Gear – Original Landing Gear for Safe and Stable DJI FPV Landings

DJI FPV Landing Gear is an original replacement landing gear set designed specifically for the DJI FPV drone. It restores proper support and a stable ground position when the original landing legs have become damaged or worn. It is a practical spare part for DJI FPV users who want to keep their drone in proper working condition while maintaining the original design, geometry, and fit.

According to DJI, the DJI FPV Landing Gear is designed specifically for the DJI FPV drone and can be removed and replaced when necessary. The package includes one pair of landing gear, making it a suitable solution when the original legs have been damaged by a hard landing, transport, or other mechanical stress.

Designed Specifically for the DJI FPV Drone

DJI FPV Landing Gear is not a universal landing leg kit but an original accessory designed for the DJI FPV platform. Its shape, mounting points, and dimensions correspond to the drone’s original construction, eliminating the need for universal adapters or modifications to the aircraft body.

On the DJI FPV, the landing gear forms part of the complete airframe structure. Its purpose is to provide the drone with the necessary support on the ground and keep the aircraft stable before takeoff and after landing.

Using an original replacement part is particularly important during repair because it preserves the geometry and positioning intended by the manufacturer.

Practical Replacement for Damaged Landing Gear

FPV flying can be significantly more dynamic than operating a conventional camera drone. Fast flight paths, Manual mode, and more aggressive maneuvers mean that landings can occasionally be harder than usual.

If a landing leg is damaged, cracked, or deformed after an impact, it does not necessarily mean that the entire drone needs to be replaced. DJI FPV Landing Gear is available as a separate replacement component and is designed to be removed and replaced when needed.

This makes the DJI FPV platform more practical over long-term use. A damaged component can be replaced while restoring the aircraft as closely as possible to its original configuration.

Stable Support During Takeoff and Landing

The primary purpose of the landing gear is to create a stable contact point between the drone and the ground. DJI FPV Landing Gear helps keep the aircraft in its intended position before the motors are started and after landing.

A stable position is especially important on hard and relatively level surfaces, where the drone should remain steady before takeoff. Properly functioning landing gear also helps prevent the aircraft from leaning because of a damaged or deformed leg.

If one of the DJI FPV landing legs has suffered a strong impact, it should be inspected carefully before the next flight. Visible cracks, deformation, or loose mounting points may indicate that the part should be replaced.

Helps Protect the Lower Structure of the Drone

The landing gear does more than simply keep the drone upright. It also creates physical clearance between the aircraft body and the ground.

DJI FPV Landing Gear helps reduce direct contact between the drone’s lower components and the landing surface. This is useful on asphalt, concrete, and other hard surfaces where direct contact with the body could cause scratches and wear.

The landing legs absorb part of the contact associated with normal takeoffs and landings, making them an important structural component of the drone.

Original Fit Without Universal Adapters

One of the biggest advantages of the original DJI FPV Landing Gear is its direct compatibility with the DJI FPV drone. Universal or third-party solutions may require additional clamps, adapters, or mounting hardware.

The original DJI part, by contrast, is intended to replace the existing landing gear component directly. Its design follows the original structure of the DJI FPV platform.

This helps preserve the intended dimensions, mounting points, and ground clearance of the aircraft.

Compact and Lightweight Construction

Every structural component matters on a drone because unnecessary weight affects the aircraft’s total mass. Landing gear therefore needs to be strong enough to provide reliable support while remaining as light as possible.

DJI FPV Landing Gear follows the lightweight construction of the original DJI FPV design. Published product specifications commonly list the set at approximately 10 grams, with approximate dimensions of 8.5 × 9 × 3 cm.

Its low weight means that replacing the original component does not add unnecessary mass or make the aircraft disproportionately bulky.

Replaceable Design Simplifies Repairs

The DJI FPV is designed so that certain external components can be replaced separately. This is particularly useful for landing gear because the lower and protruding parts of a drone are often among the first components to be damaged during a hard landing.

The DJI FPV user documentation describes a landing gear removal procedure involving M1.6 screws. On the left landing leg, the process also requires careful handling of the antenna light board located inside the leg.

This means that DJI FPV Landing Gear is a replaceable component, but it should not be treated as a purely decorative clip-on accessory. Installation should be carried out carefully and in accordance with the drone’s construction.

A Useful Spare Part for Active FPV Pilots

For users who fly the DJI FPV regularly, keeping a spare DJI FPV Landing Gear set can be a sensible precaution even before the original component becomes damaged.

FPV flying can take place on asphalt, forest trails, fields, mountainous terrain, and dedicated flight areas. Not every landing surface is perfectly smooth, and even experienced pilots can occasionally experience a harder-than-normal landing.

Having a replacement part available can be especially valuable when traveling or during a professional shoot, where a small damaged component could otherwise interrupt the use of the entire drone.

Suitable for Restoring a DJI FPV After Minor Damage

The DJI FPV landing gear can be damaged if the drone lands unevenly or contacts an obstacle. If the damage is limited to the replaceable landing leg and the rest of the aircraft remains technically sound, DJI FPV Landing Gear allows the damaged section to be restored with an original replacement part.

After a more serious impact, however, it should not be assumed that the visibly damaged landing leg is the only affected component. The propellers, motors, arms, body, camera, gimbal, and other visible areas should also be inspected.

If the aircraft has suffered a major impact or behaves differently afterward, its overall technical condition should be verified before the next flight.

An Important Part of the Pre-Flight Check

The condition of the landing legs should be checked together with the propellers, motors, and aircraft body before each flight session.

DJI FPV Landing Gear should be securely attached to the drone and free from cracks or visible deformation. The mounting points should also be checked to ensure that everything is properly secured.

A small crack may initially appear insignificant, but repeated landings and vibration can cause the damage to spread over time. Replacing the component early helps avoid a situation where the landing leg fails completely at an inconvenient moment.

Practical for Professional Use

Although the DJI FPV is popular with hobby users, it is also used professionally for dynamic FPV video production. In this environment, the drone may complete many flights in a single day and be transported repeatedly between shooting locations.

DJI FPV Landing Gear is a practical spare part for such workflows. If the landing gear is damaged, having a replacement readily available can help minimize downtime.

With professional equipment, it is often sensible to carry smaller replaceable components that are more likely to suffer mechanical damage during intensive use.

Useful for Restoring a Used DJI FPV

DJI FPV Landing Gear can also be useful when maintaining or restoring a second-hand DJI FPV drone. If the existing landing legs are heavily scratched, cracked, or otherwise damaged, worn components can be replaced with original parts.

This helps restore both the appearance of the drone and its correct standing position on the ground.

When inspecting a used drone, it is also advisable to check the mounting points and surrounding structural components to ensure that earlier hard landings have not caused more extensive damage.

Precise Compatibility with the DJI FPV Platform

DJI FPV Landing Gear is designed specifically for the DJI FPV Drone. It is not a universal part for DJI Avata, Mavic, Mini, or Air series aircraft.

This is important when purchasing a replacement because the landing gear of different DJI models varies in dimensions, geometry, and mounting method.

If the goal is to repair the original landing gear of a DJI FPV drone, a model-specific replacement is the most appropriate solution.

Technical Design

DJI FPV Landing Gear is a replaceable landing gear assembly designed for the DJI FPV drone. The package includes one pair of DJI FPV landing legs, and the intended compatibility is the DJI FPV Drone.

Published specifications list approximate dimensions of 8.5 × 9 × 3 cm and a weight of around 10 grams, describing a compact and lightweight structure consistent with the original DJI FPV landing gear design.

The DJI FPV user documentation indicates that landing gear removal involves M1.6 mounting screws, and removal of the left landing leg also requires careful handling of the antenna light board located inside it. For this reason, following DJI’s official replacement procedure is recommended.

Landing Surface Choice Affects Wear

Even with original landing gear, choosing an appropriate takeoff and landing surface can help reduce wear.

Hard asphalt or concrete provides a stable base but may scratch the landing legs more quickly. Tall grass and very uneven terrain, on the other hand, can make it more difficult for the drone to stand securely.

Whenever possible, using a clean, level surface or a dedicated drone landing pad can help keep both the DJI FPV Landing Gear and the lower section of the aircraft cleaner while reducing contact with sand, dust, mud, and small stones.

Original Parts Help Preserve the DJI FPV Design

A variety of third-party landing gear extensions and alternative solutions are available, but the purpose of the original DJI FPV Landing Gear is to restore the manufacturer’s intended configuration.

This is especially important when the existing landing gear is damaged and the goal is to repair the aircraft rather than modify it.

Maintaining the original dimensions also helps ensure that the drone continues to fit properly inside transport cases and bags designed specifically for the DJI FPV.

A Small Spare Part with an Important Function

Landing gear may seem simple compared with the camera, motors, or flight control system, but it plays an important role in everyday use.

DJI FPV Landing Gear creates the necessary support between the drone and the ground, helps keep the aircraft stable, and absorbs normal contact during landing. If the component is damaged, it is worth replacing it before the problem begins to affect the aircraft’s stability on the ground.

Because DJI designed the landing gear as a replaceable component, normal mechanical damage does not necessarily require replacing larger parts of the aircraft structure.

Why Choose DJI FPV Landing Gear?

DJI FPV Landing Gear is a practical original replacement part for DJI FPV users who want to replace damaged or worn landing gear and restore the aircraft’s original configuration. It is designed specifically for the DJI FPV drone and can be removed and replaced when necessary. The package includes one pair of landing legs.

The lightweight and compact construction avoids unnecessary added mass, while the original geometry helps preserve the intended support and ground position of the DJI FPV. Its replaceable design makes it useful both for active hobby pilots and professional FPV operators.

If your DJI FPV landing gear has been damaged, cracked, or deformed after a hard landing or impact, DJI FPV Landing Gear provides an appropriate solution for restoring the original landing structure. It is a small but important component that helps keep the DJI FPV stable on the ground and ready for the next flight.

View more accessories here.