
ALIENTECH DUO 3 for DJI RC Pro
1,165.00 €
Alientech Duo 3 is a professional antenna and signal booster system designed for the DJI RC Pro remote controller. Supporting 2.4 GHz, 5.2 GHz, and 5.8 GHz frequencies, it combines a high-gain directional antenna with active bidirectional amplification to help improve drone control and video transmission reliability.
Featuring an integrated 3000 mAh battery, Alientech Duo 3 delivers antenna gain exceeding 13 dBi at 2.4 GHz and 15 dBi in the 5 GHz bands. It is a practical solution for DJI RC Pro users seeking additional communication performance during demanding professional drone operations.
Alientech Duo 3 – Professional Signal Booster for DJI RC Pro
Alientech Duo 3 is a professional antenna and signal amplification system designed to improve the radio communication capabilities of the DJI RC Pro remote controller. Combining a high-gain directional antenna with an active bidirectional amplifier, it is intended to support more reliable control and video transmission in challenging radio environments.
The DJI RC Pro version of Alientech Duo 3 is suitable for professional drone operators who require additional communication performance during inspections, surveying, aerial observation, and other demanding applications. Supporting 2.4 GHz, 5.2 GHz, and 5.8 GHz frequency bands, the system offers a versatile solution for compatible DJI aircraft.
Tri-Band Support for 2.4 GHz, 5.2 GHz, and 5.8 GHz
Alientech Duo 3 supports three commonly used wireless communication frequency bands, making it suitable for different drone communication systems.
Its operating frequency ranges are 2400–2485 MHz and 5150–5850 MHz, covering the 2.4 GHz, 5.2 GHz, and 5.8 GHz bands.
This broad frequency support allows the amplifier to work with different communication configurations supported by the DJI RC Pro and compatible aircraft.
The actual frequency used during operation depends on the drone model, remote controller firmware, regional restrictions, and radio conditions.
The amplifier does not enable unsupported frequencies on the connected drone or controller.
High-Gain Directional Antenna
One of the main advantages of Alientech Duo 3 is its high-gain directional antenna, designed to concentrate radio energy toward a particular area.
According to the manufacturer, antenna gain exceeds 13 dBi in the 2.4 GHz band and 15 dBi in the 5 GHz bands, with a stated tolerance of approximately ±1 dB.
The horizontal half-power beamwidth is approximately 65–84 degrees, while the vertical beamwidth is approximately 63–75 degrees.
These characteristics make antenna orientation particularly important. The best results are generally achieved when the antenna is directed toward the aircraft.
If the drone moves outside the antenna’s primary coverage area, signal performance may decrease.
For this reason, Alientech Duo 3 is especially suitable for operators who can monitor and adjust the antenna direction during flight.
Active Bidirectional Signal Amplification
Alientech Duo 3 combines directional antenna gain with active radio frequency amplification.
The system amplifies both transmitted and received signals, helping support communication between the remote controller and aircraft in both directions.
The manufacturer specifies approximately 12 dB ±1 dB of receive gain at 2.4 GHz and 15 dB ±1 dB at 5.2 GHz and 5.8 GHz.
Transmit gain is approximately 15 dB ±1 dB, with a supported input power range of 10–25 dBm.
This configuration is intended to improve the radio link budget and provide additional communication margin in suitable operating conditions.
Actual results depend on the aircraft’s communication system, antenna alignment, terrain, interference, and other environmental factors.
Specifically Designed for DJI RC Pro
This version of Alientech Duo 3 is intended for use with the DJI RC Pro remote controller.
DJI RC Pro is a professional controller with an integrated display, designed for use with selected DJI aircraft.
The Alientech Duo 3 system provides an external high-gain antenna and amplification solution for the controller’s compatible radio communication hardware.
Alientech offers different installation and adapter configurations for various DJI remote controllers. Users must select the version specifically intended for DJI RC Pro.
Installation may involve modifying the controller’s antenna connections or using dedicated adapter components. The exact procedure depends on the supplied kit.
Users should carefully review the manufacturer’s installation instructions before attempting modifications. Incorrect installation can damage antenna connections, reduce communication performance, or affect the controller’s warranty.
Compatibility with DJI Drones
The DJI RC Pro version of Alientech Duo 3 is intended to support radio communication with aircraft that are already compatible with the DJI RC Pro controller.
The manufacturer lists several relevant aircraft families, including DJI Mavic 3, Mavic 3 Pro, Mavic 3 Classic, Mavic 3 Enterprise, DJI Air 2S, and DJI Mini 3 Pro.
Compatibility must be verified for the exact aircraft model, controller version, firmware, and installation configuration.
Alientech Duo 3 does not make an otherwise incompatible drone compatible with DJI RC Pro.
Before purchasing, users should also confirm that the selected package includes the appropriate DJI RC Pro connection accessories.
Integrated 3000 mAh Battery
Alientech Duo 3 includes an integrated rechargeable battery to power its active signal amplification circuitry.
The manufacturer specifies a battery voltage of 3.7 V and a capacity of 3000 mAh.
The amplifier operates at 6–9 V internally, while its specified current consumption can reach approximately 435 mA at a 28 dBm output power and 9 V operating voltage.
The integrated battery makes the system convenient for field operations by reducing dependence on an external power source.
Actual battery life varies according to operating conditions and usage. Operators should check the battery charge before starting longer assignments.
Low Noise Figure and Minimal Signal Processing Delay
Alientech Duo 3 is designed to amplify radio signals efficiently while limiting additional noise and processing delay.
Its specified noise figure is no greater than 2.5 dB, while the manufacturer’s stated transmission delay is no more than 1 microsecond.
These characteristics are relevant to drone communication systems where control commands and video data must be transmitted with minimal additional latency.
However, the amplifier cannot eliminate all interference, transmission delays, or communication limitations inherent to the aircraft’s radio system.
MU-MIMO and Modern Wireless Technologies
The Alientech Duo 3 system incorporates modern radio frequency amplification technology and supports communication methods used by digital wireless systems.
The manufacturer highlights MU-MIMO technology and compatibility with various wireless transmission techniques, including OFDM-based communication.
This allows the amplifier to support suitable wireless systems that use simultaneous transmission and reception paths.
Nevertheless, the actual communication capabilities remain determined by the connected controller, aircraft, and their supported protocols.
External Coaxial Cable Support
Alientech Duo 3 can also be used with suitable external coaxial cables, allowing the antenna to be positioned separately from the remote controller.
This can be useful in stationary or semi-stationary operations where the antenna needs to be placed at a more advantageous location.
The manufacturer describes lockable QMA connectors and compatible 50-ohm RG223, CG240, and RG8 coaxial cables.
Depending on the cable type and installation, cable lengths of up to approximately 35 meters may be possible in the 5.8 GHz band.
However, longer cables introduce radio frequency attenuation. Cable quality, connector condition, and proper installation are therefore essential to maintaining system performance.
External cables and tripods may be sold separately and should not be assumed to be included in every package.
Wide Operating Temperature Range
Alientech Duo 3 is designed for use in a range of outdoor operating environments.
The manufacturer specifies an operating temperature range of –20 °C to +80 °C.
This provides flexibility for professional fieldwork, although the temperature limits of the DJI RC Pro controller and the aircraft must also be respected.
The amplifier’s environmental specifications do not extend the operating limits of other connected equipment.
Antenna connections, cables, and electronic components should also be protected against moisture and physical damage.
Professional Applications and Improved Communication Margin
Alientech Duo 3 can be useful for professional drone operators carrying out infrastructure inspections, surveying, aerial observation, and other tasks requiring dependable radio communication.
Its directional antenna and active amplification can improve signal conditions when properly aligned with the aircraft.
The system is particularly relevant in environments where maintaining a strong communication link is challenging.
Although the manufacturer promotes substantial potential range improvements, no specific increase in flight distance can be guaranteed.
Real-world performance depends on the drone, controller, antenna orientation, terrain, radio interference, and regional transmission power limits.
Radio Regulations and Safe Drone Operation
Before using Alientech Duo 3, operators must consider applicable radio frequency regulations.
An active amplifier and high-gain antenna can increase the effective radiated power of a communication system. The complete configuration must therefore comply with local transmission power and frequency restrictions.
In the European Union, including Estonia, operators should verify that the selected installation is permitted under applicable radio regulations.
Using a signal booster does not automatically authorize beyond-visual-line-of-sight operations or flights beyond legally permitted distances.
All drone flights must comply with applicable aviation rules and the safety instructions of DJI and Alientech.
Alientech Duo 3 – Advanced Signal Amplification for DJI RC Pro
Alientech Duo 3 is a professional signal amplification solution designed to complement the DJI RC Pro remote controller.
Supporting 2.4 GHz, 5.2 GHz, and 5.8 GHz frequencies, it combines a directional antenna with more than 13 dBi of gain at 2.4 GHz and more than 15 dBi in the 5 GHz bands with active bidirectional amplification.
Its integrated 3000 mAh battery, low noise figure, and support for external coaxial cable installations make it a versatile accessory for demanding drone operations.
For DJI RC Pro users seeking additional communication performance in challenging environments, Alientech Duo 3 offers a specialized solution, provided that installation and operation comply with relevant technical and regulatory requirements.










