Insta360 ONE RS Sticky Lens Guard – Adhesive Lens Protectors for Safer 360-Degree Camera Use

Insta360 ONE RS Sticky Lens Guard is a set of adhesive lens protectors specifically designed for the standard 360 Lens module of the Insta360 ONE RS and ONE R cameras. The protectors help reduce the risk of scratches, dust, dirt and damage caused by accidental contact, providing an additional physical barrier for the camera’s sensitive optical surfaces. This practical accessory is ideal for photographers, videographers, travellers and content creators who want to use their 360-degree cameras in various environments while keeping their lenses in excellent condition.

Unlike a conventional lens cap that must be removed before recording, Insta360 ONE RS Sticky Lens Guard is designed to protect the lenses during filming. The transparent protective elements attach around the lenses using special double-sided adhesive tape, creating an additional protective layer in front of the camera’s optical surfaces.

The protectors are intended primarily for the standard 360 Lens module of the Insta360 ONE RS and ONE R. They are not designed for the larger 1-Inch 360 lens module used in the Insta360 ONE RS 1-Inch 360 Edition.

Specifically Designed for the Insta360 ONE RS and ONE R 360 Lens Module

The Insta360 ONE RS is a modular action camera with interchangeable lens modules that support different recording options. Its standard 360 Lens module features two opposing wide-angle lenses that capture the surrounding environment as a complete 360-degree field of view.

This optical design enables 360-degree video recording at up to 5.7K resolution, providing extensive opportunities for reframing and creative video editing.

The camera’s lenses are positioned on opposite sides of the module and protrude beyond its housing. As a result, they may be vulnerable to accidental contact and mechanical damage.

Insta360 ONE RS Sticky Lens Guard is designed specifically for this lens arrangement. The protectors are installed in front of both lenses, helping reduce direct contact with external objects.

According to the manufacturer’s compatibility information, the adhesive lens guards for the ONE R series are also compatible with the standard 360 Lens module of the ONE RS, as the two camera systems use the corresponding compatible lens module.

Additional Protection Against Scratches and Dirt

The lenses of a 360-degree camera are among its most important and sensitive components. Because both lenses capture a large portion of the surrounding environment, damage to their optical surfaces can affect the quality of recorded videos and photographs.

Insta360 ONE RS Sticky Lens Guard helps create an additional protective barrier between the camera lenses and the surrounding environment.

The protectors reduce the likelihood of direct contact with fingers, clothing, small branches and other objects.

This is particularly practical during active filming, travelling and situations where the camera is used in confined spaces or close to surrounding objects.

The transparent protective elements also help keep the lens surfaces protected when the camera is repeatedly taken out, repositioned or transported.

However, the lens protectors do not make the camera completely shockproof and cannot guarantee protection against strong impacts, falls from significant heights or crushing forces.

Transparent Design Allows Recording with the Protectors Installed

Insta360 ONE RS Sticky Lens Guard differs from a conventional lens cap because its protective elements are transparent and intended to remain installed during recording.

This means the lens protectors do not need to be removed before every filming session.

The guards sit in front of the lenses and allow the camera to capture its surroundings through an additional transparent protective surface.

This solution is suitable for users who frequently move between shooting situations and want to maintain lens protection during active recording.

However, any additional optical surface placed in front of a lens can affect image quality under certain conditions. Strong light sources, dirty protective surfaces or inaccurate installation may cause reflections, softness or distortion.

For the best results, the protectors should be installed correctly and kept clean.

Double-Sided Adhesive Attachment System

Insta360 ONE RS Sticky Lens Guard uses an adhesive mounting system that allows the protective elements to be positioned around the lenses.

Special double-sided adhesive tape is used to attach the guards and help keep them in their intended positions.

Before installation, the camera lenses and the surrounding areas should be clean and dry.

Dust, grease and other contaminants may weaken adhesion or become trapped between the protective element and the lens, affecting recorded image quality.

The guards should then be carefully aligned according to their shape and the manufacturer’s installation instructions.

Correct positioning is especially important for a 360-degree camera, as incorrectly placed components near the lenses may become visible in the recorded image.

When removing and reinstalling the protectors, users should remember that previously used adhesive may no longer provide its original holding strength. New, suitable double-sided adhesive tape is therefore recommended for reinstallation.

Protecting Both Lenses Simultaneously

The standard 360 Lens module of the Insta360 ONE RS uses two opposing lenses that record the surrounding environment simultaneously.

The module measures approximately 35 × 35 × 43 mm and weighs around 41 grams. These are the technical specifications of the camera’s 360 Lens module, not the lens protectors.

With a dual-lens system, it is important to protect both optical surfaces.

Insta360 ONE RS Sticky Lens Guard allows protective elements to be installed on both sides of the camera, reducing the risk of direct contact between the lenses and surrounding objects.

This is useful when the camera is mounted on an extension pole, tripod or another suitable accessory, leaving the lenses exposed to the environment.

The protectors help reduce the risk of accidental scratches, although direct impacts and collisions should still be avoided.

Protection During Active 360-Degree Filming

One of the main advantages of a 360-degree camera is its ability to record the entire surrounding environment in a single shot.

The standard 360 Lens module of the Insta360 ONE RS can capture video at up to 5760 × 2880 pixels, corresponding to 5.7K 360-degree recording.

This recording format allows users to select different viewing angles, change framing direction and create dynamic videos during editing.

During active filming, however, the camera lenses may be exposed to accidental contact, especially when the device is used while moving.

Insta360 ONE RS Sticky Lens Guard provides additional protection when the camera is attached to a suitable mount or used for handheld filming.

The protectors are also useful for travel videos, urban environments and everyday activities where the camera is used close to various surfaces and objects.

They do not replace careful handling but help reduce some of the risks associated with regular use.

Effects on 360-Degree Stitching and Image Quality

A 360-degree video is created by combining images captured by two lenses into one continuous panorama.

This process is known as stitching.

Because the lenses record different viewing angles, their images must be combined accurately to avoid visible transitions in the final result.

Insta360 ONE RS Sticky Lens Guard adds an additional transparent surface in front of the lenses, which may affect light transmission and stitching accuracy.

It is therefore important to install the guards in the correct position and check the recorded footage before important filming sessions.

Particular attention should be paid to stitching areas, as inaccurate installation may result in visible seams or distortion.

Dirty or heavily scratched protective elements should also be avoided because they may reduce image sharpness and contrast.

Useful for Travelling and Everyday Content Creation

Insta360 ONE RS Sticky Lens Guard is suitable for users who frequently take their 360-degree camera on trips or to different filming locations.

The camera can be used to capture landscapes, city views, tourist attractions, architecture and other interesting environments.

When travelling, the camera often needs to be removed from a backpack, attached to mounts and stored again.

In these situations, additional lens protection helps reduce the risk of accidental damage to the optical surfaces.

Insta360 ONE RS Sticky Lens Guard is also a practical addition to equipment used for everyday vlogging and social media content creation.

Because the protectors are designed to remain installed during recording, they do not need to be removed before every shot.

A Practical Accessory for Virtual Tours and Real Estate Videos

The standard 360 Lens module of the Insta360 ONE RS can capture a variety of indoor and outdoor environments, including properties, offices, hotels and exhibition spaces.

Using 360-degree video allows viewers to explore the surrounding environment from multiple perspectives.

Such projects often require moving the camera between rooms and repeatedly mounting it on different tripods or supports.

Insta360 ONE RS Sticky Lens Guard helps provide additional protection for the lenses during these activities.

However, image quality and accurate stitching are particularly important for virtual tours. It is therefore advisable to check that the protectors do not cause noticeable reflections, distortion or stitching errors before recording the final material.

This helps achieve better results and reduces the need to repeat filming.

Is Insta360 ONE RS Sticky Lens Guard Waterproof?

Insta360 ONE RS Sticky Lens Guard is primarily designed to protect lenses against scratches and accidental contact.

The adhesive protective elements do not create a completely waterproof enclosure around the camera and should not be treated as accessories intended for diving.

Water trapped between the protective element and the lens may cause condensation, fogging or other problems affecting image quality.

The protectors should therefore not be used underwater, and care should be taken during heavy rain or water sports.

When correctly assembled according to the manufacturer’s requirements, certain Insta360 ONE RS configurations with the standard 360 Lens module can achieve an IPX8 waterproof rating at depths of up to 5 metres. However, this specification applies to the camera in the appropriate configuration, not to the adhesive lens guards.

A suitable manufacturer-approved protective solution should be used for underwater filming.

Maintenance and Cleaning

Insta360 ONE RS Sticky Lens Guard requires regular cleaning, just like the camera lenses, to maintain the best possible image quality.

Dust, fingerprints and other contaminants may accumulate on the protective elements during use.

A clean, soft microfibre cloth suitable for optical surfaces should be used for cleaning.

Before wiping the surfaces, loose dust and abrasive particles should be removed to avoid scratching the protective layer.

Excessive pressure or unsuitable chemicals should not be used, as they may damage the transparent surface or attachment system.

If deep scratches or other visible damage appear on a protective element, image quality may be affected and the guard may need replacing.

Compatibility with Insta360 ONE RS and ONE R Cameras

Insta360 ONE RS Sticky Lens Guard is intended for the standard 360 Lens module of Insta360 ONE RS and ONE R cameras.

This is important because the modular Insta360 ONE RS system supports several different lenses with varying shapes and dimensions.

For example, the 4K Boost Lens, 1-Inch Wide Angle Lens and 1-Inch 360 Lens have different constructions from the standard 360 Lens module.

Therefore, the same adhesive lens protectors should not be assumed compatible with every ONE RS camera configuration.

It is particularly important to distinguish the standard 360 Lens module from the Insta360 ONE RS 1-Inch 360 Edition, which features a larger lens module with two 1-inch sensors.

Insta360 ONE RS Sticky Lens Guard is not intended for the lenses of the ONE RS 1-Inch 360 Edition camera.

The manufacturer has also not confirmed compatibility of this particular protector with Insta360 X-series or GO-series cameras.