Eжемесячный платеж от 
Description
Bring hands-free and hassle-free wireless audio to your videos and content with the Saramonic Blink 500 B2+ , an ultracompact and extraordinarily easy-to-use true wireless microphone system offering a cost-effective, all-inclusive solution for recording two subjects to cameras, computers, and mobile devices.
The system includes everything necessary for recording crisp, clear speech in any location with a wireless operating range up to 150m. You get two clip-on transmitters—each with a built-in microphone, a dual-channel receiver that attaches to your camera’s shoe mount or plugs directly into your device via the included USB-C and Lightning adapters, and all the necessary accessories to ensure your productions sound broadcast-ready.
- 2 x Clip-On Transmitters with Omni Mics
- Ultracompact 2-Channel Plug-In Receiver
- 5mm Output, Lightning & USB Adapters
- Plug & Play Operation, Headphone Jack
- Adjustable Gain, Active Noise Cancelling
- Built-In Rechargeable Batteries
- Receiver 16-Hours, Transmitters 20-Hours
- Charging Case for 41.6 Hours of Power
An Ultraportable, Lightweight, and Easy-to-Use 2-Person Wireless Microphone Solution
- The Blink 500 B2+ is incredibly compact and featherweight, but don’t let the size fool you; it delivers high-quality sound and impressive performance. It is also truly simple to operate, just remove the transmitters and receiver from the charging case, plug in the receiver to your device, clip the mics to your talent, and start recording. It’s just that simple.
- The system turns on automatically and finds a clean wireless channel, so you can spend your time getting the best shot for your video and not worrying about getting great sound.
Tiny and Discrete Microphone Transmitters with Ultraclean Built-In Mics
- The two B2+ transmitters are super-compact and lightweight, allowing you to easily clip them to a shirt’s collar or discretely mount them anywhere using the included magnetic mounts. They are also versatile, allowing you to capture great audio handheld, or placed on a table or podium.
- They feature a built-in omnidirectional microphone with 17-step remote mic gain control and one-touch muting, while the included furry windscreens eliminate wind noise during outdoor shoots.
- The transmitters also feature 2-stage Active Noise Canceling, allowing you to choose the level of noise canceling you need. «High» eliminates all distracting background noise, like noisy street sounds and humming HVAC systems. «Low» allows you to still record a lower level of atmospheric sounds and room tone, but keep the focus on your subjects’ voices.
Dual-Channel Receiver, Ready to Record on Any Device You Choose
- The Blink 500 B2+ receiver is super compact and only weighs about an ounce, but it packs some serious features in its small size. It mounts on a camera shoe or directly to a device with the included USB-C and Lighting adapters.
- It features Mono, Stereo, or Safety output settings, a selectable low-cut 75 or 150 Hz filter, and a 3.5mm headphone output to ensure you always get the best recording. Use the Mobile Device Speaker Enable to playback recordings on your smartphone or tablet’s speaker without removing the receiver; it also lets you hear others during virtual meetings.
Power, Simplicity, and Convenience for Creators on the Move
- The Blink 500 B2+ features an extended battery runtime, with up to 20 hours for the transmitters and 16 hours for the receiver. That’s over twice the runtime of other micro-wireless systems, giving users the ability to shoot for an entire day on one charge.
- It also includes a 1250mAh charging carry case that provides an additional 1.6x full system charges anywhere. That gives you up to 41.6-hours of filming on a full system and case charge. Taking the system out of the charging case turns the system on and returning it to the case turns the system off automatically.
- The transmitters and receiver can be powered while in use or charged outside of the case using USB battery packs or a power supply for even more powering versatility.
Specifications
RX Receiver
- Display: OLED
- Reception Type: 2.4GHz Digital Frequency
- Modulation: GFSK
- Operating Range: Up to 492.1′ (150m) Without Obstacles
- RF Output Power: <13mW
- Frequency Response 20Hz to 20KHz
- Digital Resolution: 24-Bit/48kHz
- Signal-to-Noise Ratio: >80dB
- Distortion: <0.1%
- Analog Audio Output: 3.5mm TRS
- Digital Audio Outputs: USB-C and MFi Certified Lightning (via connection adapters)
- Output Mode Types: Mono / Stereo / Safety (Mono)
- Headphone Output Connector: 3.5mm TRS
- Selectable Low-Cut Filter: 75Hz & 150Hz
- System’s Voice Delay: ≤25ms
- OLED Screen Resolution: 128 x 80 pixels
- Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
- Battery Life: Approximately 16-hours
- Charging Time: Approximately 1.5-hours
- Battery Specifications: 3.7V / 400mAh
- Weight: 30g
- Dimensions: 1.94 x 1.48 x 0.74” (49.5 × 37.5 × 18.8mm)
- Operating Temperatures: 0° to 122°F (0°C to 50°C)
- Storage Temperatures: -50° to 122°F (–10°C to +50°C)
TX Transmitter
- Transmission Type: 2.4GHz Digital Frequency
- Modulation: GFSK
- Operating Range: Up to 492.1′ (150m) Without Obstacles
- RF Output Power: <13mW
- Frequency Response 20Hz to 20KHz
- Reference Audio Input Level: -30~-42dBv (Mic input, 0dB Attenuation)
- Digital Resolution: 24-Bit/48kHz
- Microphone Polar Pattern: Omnidirectional
- Microphone Maximum SPL: 120dB
- Microphone Sensitivity: 40±2dB (1V/pa)
- Signal-to-Noise Ratio: >80dB
- Distortion: <0.10%
- Other Functions: 2-Stage Noise Reduction & Tactile Microphone Mute Buttons
- Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
- Battery Life Recording On: Approximately 20-hours
- Charging Time: Approximately 1.5-hours
- Battery Specifications: 3.7V / 190mAh
- Weight: 0.81oz (23g)
- Dimensions: 45 × 31.6 × 13mm
- Operating Temperatures: 0°C to 50°C
- Storage Temperatures: –10°C to +50°C
Charging Case
- Power Requirements: Powered by USB-C Charging Port (DC 5V)
- Power Capacity: 1250mAh
- System Charging Time: Approximately 2-hours
- Case Charging Time: Approximately 2.5-hours
- Charge Cycles for Transmitters and Receiver: Approximately 1.6 Times
- Weight:141g
- Dimensions:118.6 x 56.2 x 62.3mm
- Operating Temperatures: 0°C to 50°C
- Storage Temperatures: –10°C to +50°C
In The Box
- Saramonic Blink 500 B2+ 2-Person Wireless Clip-On Microphone System for Cameras and Mobile Devices (2.4 GHz)
- 2 x Blink 500 B2+ Transmitter
- Blink 500 B2+ Dual-Channel Receiver
- 2 x Furry Windshield
- 2 x Magnetic Mic Mount
- Coiled 3.5mm TRS to TRS Output Cable
- Coiled 3.5mm TRS to TRRS Output Cable
- MFi Certified Lightning Adapter
- USB-C Adapter
- USB-A to USB-C Charging Cable
- Charging Carry Case with 1250mAh Internal Battery
- Drawstring Storage Pouch
