Gens ace G-Tech 4500 mAh 6S 60C HardCase LiPo Battery
The Gens ace G-Tech 4500 mAh 6S1P is a hard-case LiPo battery combining a nominal voltage of 22.2 V, a 60C continuous discharge rating and G-Tech charging technology. Its specifications suit RC models with high current demands and other battery-powered projects requiring a 6S power supply. The HardCase housing helps protect the battery cells from mechanical damage, while G-Tech technology simplifies charging with a compatible charger.
4500 mAh Capacity and 22.2 V Nominal Voltage
The Gens ace G-Tech battery has a capacity of 4500 mAh, or 4.5 Ah. Combined with its nominal voltage of 22.2 V, this provides a calculated energy capacity of approximately 99.9 Wh. Actual runtime depends on the connected device’s current draw, load and operating conditions, so battery capacity should be assessed alongside the energy requirements of the entire system.
The 6S1P designation describes a battery pack consisting of six cells connected in series. Its nominal voltage is 22.2 V, rising to 25.2 V when fully charged. It is suitable for devices with electronics designed to operate on a 6S LiPo battery and withstand its fully charged voltage.
60C Discharge Rating for Applications with Higher Current Demands
The manufacturer’s specified 60C continuous discharge rating describes the battery’s current delivery capability relative to its capacity. This matters in motor-driven models and devices where power demand increases during acceleration, under heavier loads or during rapid changes in operation.
Battery selection should account for both normal operating loads and peak demands. The battery, wiring, connectors, motor and control electronics must work together as a compatible system. The voltage and current ratings of all these components must meet the requirements of the intended application.
HardCase Housing Provides Additional Cell Protection
The rigid outer housing of the Gens ace G-Tech HardCase battery helps protect its cells from mechanical stress during handling and use. Its defined shape also makes it easier to fit the battery into a suitable compartment or a purpose-built holder.
The battery measures approximately 138 × 46 × 49 mm and weighs around 614 g. When planning installation, allow space for wiring, connectors and mounting hardware as well as the housing itself. In moving models, secure mounting and careful positioning are essential to maintain balance and avoid strain on the connections.
Applications in RC Models and Engineering Projects
The device’s technical requirements determine battery suitability. The Gens ace G-Tech 4500 mAh battery can be considered for RC cars, boats, model aircraft, drones, robotics and development projects, provided their power systems, connections and physical design are compatible.
For models operating on land or water, the main considerations may include battery compartment dimensions, current draw and weight distribution. In model aircraft and drones, the effect of battery weight on payload capacity and flight time also requires careful assessment. Robotics and experimental projects depend on the required runtime, load characteristics and compatibility with the motor controllers and voltage converters in use. The HardCase housing provides additional mechanical protection, but the battery requires separate protection against moisture in applications involving exposure to water.
G-Tech Technology Simplifies Charging
G-Tech is a communication technology developed by Gens ace that connects the battery with a compatible charger. A charger supporting G-Tech can identify battery data and use it to set charging parameters. This reduces manual data entry and makes charging setup more convenient.
When choosing a charger, check that it supports 6S LiPo batteries, has compatible connections and provides sufficient charging power. The available G-Tech functions depend on the specific charger and its capabilities.
Charging and Everyday Use
The manufacturer recommends a charging rate of 1–3C, corresponding to a charging current of 4.5–13.5 A for this battery. The appropriate setting depends on the charger’s capabilities and the conditions specified in the battery and charger manuals. Balance charging helps keep the voltages of all six cells equal.
To preserve battery service life, avoid overcharging, excessive discharge and overheating. During longer periods of inactivity, use the charger’s LiPo storage mode and keep the battery in a cool, dry place. Before use, inspect the housing, wiring and connectors to ensure the battery is ready for its next session.
Browse the full range of FPV batteries here.
