Anker Laptop Charger – 140W four-port GaN charger with USB-C cable

Anker Laptop Charger (140W, 4-Port, PD 3.1) is a wall charger for laptops, smartphones, tablets and other compatible USB-chargeable devices. Three USB-C ports and one USB-A port accommodate up to four devices simultaneously. It suits users who want to charge several work and everyday devices from one charger and monitor key charging information on an integrated colour display. A USB-C to USB-C cable is included.

Two USB-C ports supporting up to 140W and PD 3.1

USB-C1 and USB-C2 each support up to 140W output when used individually. Their fixed output modes are 9V / 3A, 15V / 3A, 20V / 5A and 28V / 5A. Maximum output is intended for devices supporting the corresponding USB Power Delivery 3.1 charging mode; it does not mean every connected device will charge at 140W. Actual charging power depends on charging modes supported by both device and cable, as well as the combination of ports in use.

USB-C3 delivers up to 40W individually, while USB-A provides up to 33W. USB-C1 and USB-C2 also support PPS charging from 4.5 to 20V, at up to 5A and a maximum of 100W. Charging above 100W requires an appropriately rated cable with an E-Marker chip.

Power distribution when charging several devices

Anker Laptop Charger distributes available power across connected ports. Using USB-C1 and USB-C2 together provides up to 70W + 70W. Pairing USB-C1 or USB-C2 with USB-C3 provides up to 100W + 40W, while pairing either with USB-A provides up to 100W + 33W. USB-C3 and USB-A share a combined output of up to 24W when used together.

Using all three USB-C ports provides up to 65W + 45W + 30W. With all four ports in use, USB-C1, USB-C2, USB-C3 and USB-A provide up to 65W, 45W, 12W and 12W respectively, for a total of up to 134W. Other connected devices therefore need to be considered when charging a laptop with higher power requirements. Anker recommends disconnecting unused cables from the charger so they do not limit maximum output available to other ports.

Colour display and temperature monitoring

An integrated colour display shows charging power, port status and temperature. This GaN charger includes short-circuit and over-temperature protection. During extended operation at high temperatures, it automatically reduces output power, so actual output may fall below its rated maximum.

Compatibility and electrical specifications

Anker lists MacBook Air and MacBook Pro series, HP Chromebook 14, iPhone 12–16 and SE series, Samsung Galaxy S23 and S24 series, Google Pixel 7 and 8 phones, and Steam Deck among compatible devices. A charging cable suitable for the specific device is required. Dell XPS 15 models 9500 and 9510, Dell Alienware X14 and Dell Mobile Precision Workstation 5570 may experience limited charging speeds because of Dell’s proprietary charging protocol.

Input is 100–240V AC, 50/60Hz, with a maximum input current of 2.6A. Manufacturer-listed dimensions are 69 × 69 × 36mm. This wide input voltage range allows use with electrical systems operating at different mains voltages, provided the plug and socket are compatible.

See the full selection of cables and chargers here.