DJI Power SDC to DJI Matrice 4 Fast Charge Cable – Up to 200W Charging for Professional Drone Batteries

DJI Power SDC to DJI Matrice 4 Fast Charge Cable connects a DJI Power series portable power station directly to a DJI Matrice 4 Series flight battery. Charging power of up to 200W helps restore battery capacity quickly, even during field operations, while reducing downtime between assignments. Cable is compatible with DJI Matrice 4E and DJI Matrice 4T batteries and is designed primarily for professional drone operators who need a mobile and reliable charging solution.

Charging a Matrice 4 Series battery from 0% to 100% takes approximately 48 minutes under suitable conditions. When fast turnaround is required during a working day, charging from 10% to 90% takes around 31 minutes. This makes the cable a practical accessory for surveying, mapping, inspection, thermography, rescue operations, and other applications where a drone needs to return to the air as quickly as possible.

Up to 200W Fast Charging for DJI Matrice 4 Batteries

DJI Power SDC to DJI Matrice 4 Fast Charge Cable supports charging power of up to 200W. One end connects to an SDC port on a DJI Power series power station, while the other connects to a DJI Matrice 4 Series battery. This allows a professional drone battery to be charged from a portable power station without requiring immediate access to mains electricity.

SDC interface is designed for high-power energy transfer within DJI Power ecosystem. When used with a compatible DJI Power power station, it provides a faster and more convenient way to charge a Matrice 4 battery in locations where using a conventional charger may be difficult. Actual charging power and charging time depend on power station charge level, battery temperature, and other operating conditions.

Reduced Downtime Between Assignments

In professional drone operations, time spent charging batteries has a direct effect on overall efficiency. If a flight battery runs low during surveying, inspection, or mapping, a long charging break can interrupt workflow and extend time spent on site. With charging power of up to 200W, this cable helps reduce such delays.

According to DJI, charging one Matrice 4 Series battery from 0% to 100% takes approximately 48 minutes. Reaching the more practical 10% to 90% range takes around 31 minutes. This allows a battery to be charged during work breaks, preparation for the next flight, or data review, helping keep a drone ready for use throughout more of the working day.

Charging times are approximate and based on suitable conditions. Actual results may vary depending on initial battery level, temperature, DJI Power power station model, and available output at the time of charging.

Compatible with DJI Matrice 4E and Matrice 4T Drones

Cable is designed for DJI Matrice 4 Series flight batteries and is compatible with DJI Matrice 4E and DJI Matrice 4T. Matrice 4E is intended primarily for surveying, mapping, and visual inspection, while Matrice 4T is designed for thermography, rescue operations, public safety, and other specialised applications.

Fast and mobile battery charging is important with both drones, as operations often take place away from mains power or across several locations. DJI Power SDC to DJI Matrice 4 Fast Charge Cable allows a DJI Power power station to serve as a charging source for drone batteries directly in the field.

Cable is intended specifically for Matrice 4 Series and should not be selected for batteries from other DJI drone series based solely on a similar appearance. Different DJI flight batteries require model-specific SDC charging cables.

Broad Compatibility with DJI Power Series Power Stations

DJI Power SDC to DJI Matrice 4 Fast Charge Cable is compatible with DJI Power 500, DJI Power 1000, DJI Power 1000 V2, DJI Power 1000 Mini, and DJI Power 2000 portable power stations. This allows users to select an energy source suited to workload and portability requirements.

A more compact power station is suitable for field operations with less equipment, while a higher-capacity model is better suited to longer working days and repeated charging of several batteries. Number of available charging cycles depends on battery capacity and charge level of the DJI Power power station being used, as well as whether it is supplying energy to other devices at the same time.

Safe Charging After a Flight

Immediately after a flight, Matrice 4 battery temperature may be above the permitted charging range. Starting to charge an excessively hot battery is not recommended, as battery management system may limit charging power or temporarily suspend charging.

DJI recommends waiting until battery temperature falls below 40°C before starting to charge. This helps maintain a stable charging process and supports long-term battery performance and service life. Allowing battery to cool is particularly important in hot weather, direct sunlight, or after a demanding flight.

Compact 40 cm Cable for Field Operations

Cable is 40 cm long, allowing a DJI Power power station and Matrice 4 battery to be positioned close together during charging. Compact length helps reduce tangling and makes the cable easy to store in a drone case, equipment box, or transport bag.

Small size and straightforward connection make the cable suitable for mobile use. It is easy to carry to construction sites, fields, forests, infrastructure facilities, and other locations where Matrice 4 drones are used for professional assignments.

Practical Charging Solution for Professional Drone Operators

DJI Power SDC to DJI Matrice 4 Fast Charge Cable is an essential accessory for users who want to charge DJI Matrice 4E or Matrice 4T batteries from a DJI Power series power station. Charging power of up to 200W, approximately 48-minute full charging time, around 31-minute charging time from 10% to 90%, and compatibility with several DJI Power models make it a practical solution for professional field operations.

Cable helps reduce dependence on an on-site electricity supply, shorten breaks between flights, and use DJI Power ecosystem as an efficient mobile charging solution. Its compact 40 cm design makes it easy to transport and store alongside other Matrice 4 equipment.