Watch a video about the product here.
DJI Matrice 350 RTK Efficient and Powerful Flight Capabilities
- Maximum flight time: 55 minutes
- IP55 protection class
- Night vision FPV camera
- Maximum carrying capacity: 2,7 kg
Stability with the new transmission system
- O3 Enterprise Transmission
- Triple 1080p live streaming
- Maximum transmission distance: 20 km
- 4 antenna design
DJI Matrice 350 RTK New Driving Experience
- 7-inch high brightness screen
- IP54 protection class, operating temperature: -20 to 50℃
- DJI Pilot 2
Updated Battery System
DJI Matrice 350 RTK is weatherproof for Different Environments For Work
- IP55 protection class on the drone
- Remote control with IP54 protection class
- Wind resistance up to 12 m/s
- Operating temperature range: -20°C to 50°C
- Maximum altitude: 7000 m
Enhanced Aviation Safety
- Arm Lock indicator
- Night vision FPV camera
- 6-way detection and positioning
- CSM radar
- Multi-layer redundancy design
Stability with the new transmission system
- O3 Enterprise Transmission
- Maximum transmission distance: 20 km (~12.43 miles)
- Improved alert robustness algorithm
- Triple 1080p HD real-time transmission
- Supports 5.2GHz (only available in CE region)
Four Antenna Design
- Two additional antennas on the back of the drone
- 2 transmitting and 4 receiving antennas (the system intelligently selects the two most optimal antennas to transmit signals, while all four antennas receive signals).
- Media download speed is doubled
- Powerful GNSS & RTK module
New GNSS Chip
- The M350 RTK is equipped with a new GNSS chip, which ensures better signal reception and a higher number of satellites.
New RTK Module
- The new RTK module supports the GPS L5 frequency band. When RTK is activated, RTK is faster and easier to fix.
Upgraded Battery System
- TB65 intelligent flight battery
- 400 charging cycles
- Self-heating at low temperatures
- Self-draining storage
- Charging without waiting for cooling (if ambient temperature is below 37°C)
BS65 Battery charger
- 8 x TB65 battery sockets, 4 x WB37 battery sockets, 1x USB-C maintenance port, 1 x USB-C charging port and 1 x USB-A charging port.
- Simultaneously charges two drone batteries, one RC battery (WB37) and one RC Plus remote control.
- Intelligent management: when the station is connected to RC Plus, battery health information is displayed.
Versatile charging mode
- Default mode: each pair is successively charged to 100% (self-discharging).
- Ready to Fly Mode: each pair is successively charged to 90% and maintained at 90% (recommended for first responder).
- Storage mode: each pair is charged and maintained at 50% (recommended for long-term storage).
Optimised Airline and Battery Bags
- M350 Carrying Bag: Universal wheels, easier to move. Two attachment pockets, can carry two loads at once.
- BS65 Battery pack: universal wheels, easier to move. Can carry 8 x TB65 and 4 x WB37 batteries for transport.
Power Loads
- Maximum carrying capacity: 2,7 kg. The drone can carry up to three stabilizer mounts and four loads.
Supported Stabilizers
- One downward stabiliser, two downward stabilisers and one upward stabiliser
E-Port Open Interface
- E-Port is the new generation of open interface on DJI Enterprise drones and the pin definition is consistent with the OSDK interface.
- E-Port can perform both OSDK and PSDK interface functions.
DJI Loads
- Respond to the needs of different industrial scenarios, such as public security, inspection and mapping.
Hybrid Sensor – H20 Series
- Four-sensor system: zoom camera, wide-angle camera, thermal camera and laser rangefinder.
Starlight – H20N
- Starlight zoom and wide angle cameras, dual zoom thermal imaging cameras and laser rangefinder.
Full Frame Surveillance Camera – P1
- Full-frame sensor with interchangeable fixed focus lenses on top of a 3-axis stabilizer. Designed with photogrammetry for airborne missions.
Lidar – L1
- Livox Lidar module, a high-precision IMU and mapping camera that effectively captures details of complex structures and provides highly accurate reconstructed models.
*Existing loads need to be updated to the latest firmware to adapt to the M350 RTK.
DJI Matrice 350 RTK Third-party loads
- Spotlight
- Multispectral sensor
- Megaphone
- 5-lens camera
- Laser methane telemeter
- Spectrum analyser
- Gas detector
- 50mm thermal imaging sensor
- 4-in-one UV sensor
Existing M300 third-party loads will need to be updated to support M350, and some will need Skyport upgrades from V1 to V2. Please consult your cargo supplier for details.
DJI Matrice 350 RTK Accessories
- DJI RC Plus: 7-inch screen, 1200 cd/m² brightness, IP54 protection class, -20 to 50°C. 8-inch chip, 4x CPU and 7x GPU power compared to Controller Enterprise. Battery life: 6 hours with WB37 battery.
- CSM Radar: Detection angle: horizontal 360°, vertical 60°, upwards 45°. Detection range: 1.5 to 30 m. Detection range: 1.5 to 30 m. Maximum speed with obstacle avoidance: 10 m/s. Maximum speed with obstacle avoidance: 10 m/s. Maximum speed with obstacle avoidance: 10 m/s. Accurate detection of small obstacles.
- Low Noise and High Altitude Propeller: Improves flight performance in high altitude conditions. Propeller noise is reduced by 2 dB compared to 2110s propellers.
Professional Software
- DJI Pilot 2: The remote control has a built-in DJI Pilot 2 app. Supports multiple mission planning options, including waypoints, mapping, inclined, linear.
- DJI FlightHub 2: FlightHub 2 features are also available, including live streaming, aircraft information, real-time 2D mapping, panorama and media upload, and mission planning.
- DJI Terra: All-in-one platform: 2D/3D, multispectral, Lidar point cloud reconstruction. Multiple results to meet different business needs.
- DJI Thermal Analysis Tool 3.0: DJI Thermal Analysis Tool 3 has been supported since launch, allowing you to generate reports and manipulate radiometric thermal data following specific parameters for data collection.
Scalability
- Payload SDK: Offers three integration options – E-Port, SkyPort V2 and DJI X-Port – which significantly reduces the payload development cycle.
- Mobile SDK: Easily deploy customised apps to your fleet of DJI drones, allowing pilots to optimise flights across their operations.
- Cloud API: no more app development required. No need to develop an application. Sync your drone directly to your cloud platform via DJI Pilot2.
DJI Matrice 350 RTK User Data Security and Compliance
- Encryption of media data
- Local data mode
- Delete all your device data with one click
- AES-256 encryption of video transmissions
- Separate deployment (Cloud API)
- C3 labelling* (EU region)
- C2 labelling for the Mavic 3 Enterprise Series and M30 Series will also be available later this year.
High Precision Mapping
- Multi-Mission Flights: The Matrice 350 RTK supports waypoint, mapping, slope and linear flight missions; supports terrain following or smart slope to enhance data collection.
- High Accuracy: RTK positioning, TimeSync function for high accuracy without GCP. With DJI Terra, you can quickly get HD 2D and 3D digital results, enabling high accuracy and high efficiency mapping operations.
DJI Matrice 350 RTK Air to Ground Coordination
- Data Synchronisation: thanks to features such as high-precision PinPoint and cloud-based real-time mapping, the Matrice 350 RTK can combine air, ground and cloud into a single system. After completing aircraft imagery capture, the DJI FlightHub 2 can quickly model the job site and transmit command information to aircraft and ground operators.
Automated Precision Inspection
- Automated Inspection: with real-time mission recording, it can generate and store flight path files that can be used at any time to perform automated operations. When using AI Spot-Check, it supports automatic framing and manual adjustment to improve the accuracy of repeated sampling and inspection quality.
