DJI Matrice 5 Series Charging Hub – a three-battery charging hub for Matrice 5T
DJI Matrice 5 Series Charging Hub helps keep DJI Matrice 5T flight batteries ready for upcoming flights. It accommodates up to three DJI Matrice 5 Series batteries and charges them sequentially. This removes the need to connect another battery manually after each one finishes charging, making preparation for a multi-battery workday easier.
Up to 515 W of charging power, two charging modes and a separate USB-C output suit teams using drones for inspections, mapping or other work involving repeated flights. A remote controller can also be charged over USB-C while a flight battery is charging.
Standard and Standby modes to suit your schedule
Standard mode charges a battery to 100% when you want to start with a full battery. Standby mode stops at 95% and suits situations where getting a battery ready sooner is the priority. The three slots use sequential charging: one flight battery charges at a time before charging moves to the next.
With a DJI 515W Power Adapter, one battery takes approximately 45 minutes to charge from 0% to 100%, or around 40 minutes from 0% to 95%. Charging from 10% to 95% in Standby mode takes approximately 31 minutes. These times apply at an ambient temperature of 25 °C; charging may take longer in colder or hotter conditions, depending on battery status.
Active cooling and USB-C connectivity
A built-in fan helps cool the hub during operation. The charging temperature range is +5 to +40 °C. Actual charging power depends on operating conditions and may be reduced if overheating occurs.
A side USB-C port serves two purposes: updating hub firmware and supplying power to external devices. USB-C output supports 5, 9, 12, 15, 20 and 28 V. Battery port output ranges from 15 to 25.8 V.
For Matrice 5 batteries and a 515 W power adapter
This hub is designed for DJI Matrice 5 Series batteries used by DJI Matrice 5T. Input is 14.9–26.4 V, with a maximum input current of 22 A. Connect a DJI 515W Power Adapter for charging from mains power.
The package contains one DJI Matrice 5 Series Charging Hub. A power adapter and flight batteries are not included, so it can supplement existing Matrice 5T charging equipment or form a separate charging setup with a suitable adapter.